KEPOLY-modified PPO resin
KEPOLY‑modified PPO resins are a class of engineering thermoplastic resins based on polyphenylene ether (sometimes referred to as polyoxypropylene or PPO). PPO is a high‑temperature‑resistant amorphous polymer that, when blended with polystyrene, forms a mutually soluble single‑phase blend. By employing this technology along with other additives, it is possible to produce a family of resins with a broad range of physical and thermal properties. In addition to excellent high‑temperature resistance, superior mechanical performance, and flame retardancy, KEPOLY‑modified PPO also offers design flexibility and a wide array of processing options. These resins exhibit the lowest moisture absorption and hydrolytic stability among all engineering thermoplastics; consequently, they maintain favorable electrical properties even under conditions of significant fluctuations in humidity and temperature.
Main uses
● Automotive industry: automotive instrument panels, radiators, wheel covers, bumpers, car doors, pillars, fender panels, central door locks, and other components.
● Electronics industry: coil bobbins, chargers, relay housings, terminal blocks, solar junction boxes, electrical enclosures, wires and cables, etc.
● Electrical appliance industry: LED and LCD panels, TV casings, electric shavers, rice cookers, digital cameras, etc.
● Fluid industry: pump housings, pump impellers, flow dividers, valve cores, water meter casings, water purifiers, etc.
● Other applications: building materials and decoration, medical devices, food packaging, etc.
Performance Metrics
|
Typical Properties |
Test Method |
Test Condition |
Typical value 2301 |
Typical value 1001G25 |
Unit |
|---|---|---|---|---|---|
|
Physical Properties |
|
|
|
|
|
|
Density |
ASTM D792 |
— |
1.11 |
1.2 |
g/cm³ |
|
Water absorption |
ASTM D570 |
— |
0.06 |
0.06 |
% |
|
Mechanical Properties |
|
|
|
|
|
|
Tensile Stress |
ASTM D638 |
50mm/min |
58 |
80 |
MPa |
|
Elongation at break |
ASTM D638 |
50mm/min |
/ |
/ |
% |
|
Flexural Strength |
ASTM D790 |
2mm/min |
87 |
145 |
MPa |
|
Flexural modulus |
ASTM D790 |
2mm/min |
2400 |
6400 |
MPa |
|
Impact Strength |
|
|
|
|
|
|
Izod notched impact strength of a cantilever beam |
ASTM D256 |
23°C |
140 |
100 |
J/M |
|
Thermal Performance |
|
|
|
|
|
|
Heat Deflection Temperature H.D.T |
ASTM D648 |
0.45 MPa |
115 |
137 |
°C |
|
Vicat Softening Point Temperature V.S.T |
ASTM D1525 |
50℃/h, 50N |
/ |
/ |
°C |
|
Flammability |
|
|
|
|
|
|
Flammability |
UL-94 |
3.2mm |
V-0 |
V-1 |
Class |
Disclaimer: Typical values are for reference only and do not constitute a quality guarantee.
Service Hotline
Address: No. 19, Industrial Park, Xiting Town, Tongzhou District, Nantong City
Postal code: 226300
Fax:86-513-86247026
Email:ntkepoly@163.com
QR code
Scan to access the mobile version.