Modified PA66 Series

Modified PA66 Series

This product exhibits higher mechanical strength and elastic modulus than conventional engineering plastics, a high heat deflection temperature, a broad service temperature range, excellent oil and chemical resistance, low molding shrinkage, and minimal warpage. It is well suited for precision injection molding, boasts high surface hardness, and can replace metal in many industries.

Main uses

This product is widely used in automotive radiators and heater end caps, brake fluid reservoirs, door handles, steering column switches, air filters, electrical connectors and sockets, electrical switch boxes, as well as various gears, bearings, and more.

Performance Metrics

Project

ASTM standard Unit Enhanced Series 1001G20 Enhanced Series 1001G30 Enhanced Series 1001G35 Enhanced Series 3305M30 Flame-retardant Series 2301G0 Flame-Retardant Reinforced Series 2301G20 Flame-Retardant Reinforced Series 2301G30
Density D792 g/cm³ 1.32 1.37 1.43 1.55 1.15 1.35 1.55
Water absorption rate D570 % 2 1.8 1.7 1.5 2 2 1.5
Tensile strength D638 MPa 192 195 210 85 84 150 175
Elongation D638 % 3 3 3 3 11 3 3
Simply Supported Beam Notched Impact D256 J/M 132 132 143 / 66 132 132
Hot deformation temperature D648 °C 250 250 250 250 92 245 250
Flame retardancy UL94 —— HB HB HB HB V-0 V-0 V-0
Dielectric constant (1 MHz) D150 —— 3.4 3.5 3.5 3.4 3.4 3.4 3.5
Dielectric loss tangent (1 MHz) D150 —— 0.015 0.015 0.011 / 0.015 0.015 0.015
Volume resistivity × 10¹⁵ D257 Ω·cm 1.5 1.5 1.5 1.5 1.5 1.5 1.5
Dielectric strength D149 Mv/m 35 35 35 35 35 35 35

Note: The above data represent typical experimental values and do not constitute the minimum values guaranteed under commercial terms. They are provided for reference only and shall not be construed as a formal warranty commitment.